Refrigerant supply with a simpler buying experience.Clear products. Clear information. Direct access.

Check the equipment nameplate or data label first, then confirm the information against the manufacturer's installation or service literature. The refrigerant designation should be identified directly, such as R410A, R32, R454B, R404A, R407C, R22 or R134A.

No. R410A, R32 and R454B have different operating characteristics, safety classifications and equipment requirements. R32 and R454B are A2L refrigerants intended for equipment specifically engineered and approved for their use.

A refrigerant conversion or retrofit should only be considered when permitted by the equipment manufacturer and performed according to an approved service procedure.

These refrigerants may all appear in air-conditioning or heat-pump applications, but they are separate products and should not be treated as interchangeable.

Always use the system label and manufacturer documentation as the final reference.

Different refrigerants generally should not be mixed. Mixing can alter pressure-temperature behavior, affect system performance and complicate later identification, recovery and servicing.

The advertised pound amount generally refers to the stated net refrigerant contents, not the complete shipping weight of the filled cylinder.

The cylinder shell, valve, carton and packing materials add additional weight. Confirm the net contents shown on the cylinder label for the product received.

Not necessarily. Required refrigerant charge varies according to system capacity, equipment design, line-set length, installation configuration and manufacturer specifications.

The correct charging method depends on the equipment and the manufacturer's approved procedure. Refrigerant weight is often part of the process, while pressure, temperature, subcooling and superheat measurements may also be required.

Follow the specified service method for the actual equipment rather than applying one charging rule to every system.

Each refrigerant has its own pressure-temperature relationship. Readings can also change with ambient conditions, system load and operating temperature.

Tool requirements depend on the job, but a typical refrigerant service setup may include:

• Compatible manifold gauge set
• Rated service hoses and fittings
• Refrigerant charging scale
• Vacuum pump
• Micron gauge
• Leak-detection equipment
• Recovery machine
• Approved recovery cylinder
• Temperature measurement tools

A2L work may require service equipment and procedures intended for mildly flammable refrigerants.

A low charge can indicate a leak or another system issue. Simply adding refrigerant may leave the original problem unresolved.

A qualified technician should inspect the equipment, complete necessary repairs, verify system integrity and recharge it according to the manufacturer's instructions.

Follow the cylinder label and manufacturer storage instructions. Cylinders should generally be secured in an appropriate ventilated area and protected from excessive heat, impact and unauthorized handling.

Additional requirements may apply when storing or handling A2L refrigerants.

Equipment originally designed for R22 may still call for R22 or an approved retrofit option when serviced. The appropriate path depends on the specific equipment, manufacturer guidance, service procedure and current regulatory requirements.

Do not select a substitute solely because its pressure characteristics appear similar.

A2L is a refrigerant safety classification associated with lower flammability characteristics than more highly flammable classes. Equipment intended for A2L refrigerants includes corresponding design, installation and service requirements.

Refrigerants used in stationary air-conditioning and refrigeration applications may be subject to U.S. EPA sales requirements. Depending on the product, transaction and intended use, Section 608 technician certification or other qualifying purchaser documentation may apply.

Buyers are responsible for complying with applicable federal, state and local rules covering refrigerant purchase, handling, recovery and service work.